Why Should I worry about Log Home Maintenance?
We visit many log homes through the year. One thing you begin to notice is the lack of maintenance on many of these homes. This is disheartening for many customers once they ask for a proposal on maintenance and get a proposal for the restoration of the log home because the existing finish was beyond maintainable condition. The truth of the matter is that might have been avoided if proper maintenance was performed consistently.

The common maintenance cost is about $2,500 – $3,000 bi-annually. Sometimes this price is gloomier and sometimes it can be higher it really depends on how the log home finish and sealants weathered in the last number of years. Some owners may end up needing maintenance each year on select hotspots around the house to be able to keep carefully the stain performing to its fullest.

What’s Log Home Maintenance?
Log home maintenance is the general upkeep on a log shell to ensure there is proper protection from damaging UV radiation, water damage, air infiltration, and insect and rodent intrusion. Maintenance also ensures the log cabin looks the way in which it did the initial day it had been finished.

One element of maintenance that basically helps to increase living of stains and sealants is an annually wash of your log home боядисване на жилищни входове цени. This removes any surface contaminants such as for instance dust, pollen, bird feces, and insect remains (webs, egg sacs, skeletons, etc.) that may wear the conclusion prematurely. Washing the house can also be a great time to locate any areas of failed caulking or chinking and provide an overall assessment of the situation of the log home stain to get a concept of what walls or areas desire a maintenance coat of stain.

A great way to assess the situation of a log home finish is to hold back for the building to dry after being washed. Once dry you should understand which kind of log home stain is on your own building. If you have a fat based stain you ought to be taking a look at the knots and checks on the walls. These areas will turn blonde when the conclusion is wearing off and this indicates that you ought to apply anyone to two maintenance coats of stain. Some oil based stains now give you a clear maintenance coat and this is actually the better route to take nonetheless it only works if the stain is not worn to bare wood.

If you have a waterborne latex based stain on your own building you ought to be taking a look at the glossiness of the finish. Once the conclusion is dull you ought to apply an obvious maintenance coat to these areas.

When caulking or chinking is failed or failing across the building you ought to mark these spots out and take away the bad areas of caulking or chinking with a knife or razor. This can allow the area behind the sealant to properly dry out since moisture was probably the reason the sealant is not sticking with the logs. Once dry apply backer rod to the log joint and apply caulk or chink to the area making certain to match the existing caulking or chinking line. This should be done before applying the maintenance coat of stain unless you have white chinking.

Leave a Reply

Your email address will not be published. Required fields are marked *